Related Posts Plugin for WordPress, Blogger... Mikrotik RouterOS ChangeLog:Coretan Kejujuran

Wednesday, October 19, 2011

Mikrotik RouterOS ChangeLog

Mikrotik RouterOS ChangeLog versi 4.0Beta1 sampai versi terbaru 5.7
Langsung saja

What's new in 5.7 (2011-Sep-14 10:54):

*) ovpn client - fixed crash when user name or password together
were longer than 11 symbols;
*) sstp client - added an option to skip
server address verification from certificate;
*) fixed problem - router crashed sometimes when using USB modem;
*) userman - show overall totals, show user totals if user has more
than one entry;
*) lcd - retrieving '/system lcd page' configuration did not work with
hundreds of interfaces;
*) webfig - added ability to reorder fields in skins;
*) webfig - added ability to add/remove new tabs & separators in skins;
*) webfig - added ability to add any field to special status page;
*) webfig - fixed problem when user sometimes got logged out with message
"internal server error";
*) webfig - logout didn't log user out from router;
*) webfig - added System/Password for changing user's own password;
*) system reset-configuration - if keep-users is specified ssh user keys are
preserved as well;
*) ipsec - new exchange mode (main-l2tp) for l2tp tunnel users to allow
FQDN as a peer ID with preshared key authorization in main mode;
*) ssh - fix possible server crash when connection is interrupted;
*) improved ipv4 forwarding performance on all boards with simple configuration
by up to 30%;
*) add passthrough setting to change-dscp, change-ttl, change-mss,
strip-ipv4-options, change-hop-limit mangle targets;
*) ipsec - fixed problem of RB1200 rebooting when large amount of UDP traffic is
sent through IPsec;
*) sniffer - added more useful packet filtering options, also available as quick
mode command parameters;

What's new in 5.6 (2011-Aug-02 14:45):

*) ipsec - fix a problem which could silently remove a manual policy
from the kernel if the peer configuration has 'generate-policy' set to 'yes'
and if the policy matches with the traffic selector of a SA being removed
on the responder side, also fix a problem that some generated policies
may stay in kernel after relevant SA was removed;
*) profiler - correctly show idle task on RB1200;
*) webfig - fix dual nstreme interface setting lists;
*) webfig - fix Wireless Access/Connect List editing;
*) webfig - fix bitrate presentation in simple queues (show 1.5M as 1500k);
*) fixed micro-sd access on RB400 not to stop everything else;
*) sstp - when server certificate verification is enabled for sstp client,
it will additionally compare IP addresses found in certificate's
subjectAltName and subject CN to the real address, DNS names are ignored;
*) tftp - optional block counter roll-over support;
*) hotspot - fixed possible crash in case of multiple Radius CoA requests;
*) userman - speedup user deletion with big log size,
note that first userman startup after this update
may take few minutes if the log size is in hundreds of MB;
*) mpls - added support for enabling/disabling control word usage for
BGP based VPLS tunnels (both - Cisco and RFC 4761 based);
*) mpls - added support for auto-discovery of VPLS NLRI encoding method
for Cisco BGP based VPLS tunnels;
*) winbox - sometimes after disconnecting, winbox could not connect back;
*) gre,ipip tunnels - new dscp parameter (0..63 or inherit);
*) ping - new dscp parameter;

What's new in 5.6:

*) bgp - allow parallel operation of RFC4761 "l2vpn" and
draft-ietf-l2vpn-signaling "l2vpn-cisco" BGP VPLS variants inside
single peering session.
*) console - ":resolve" command now returns IPv6 address for domain names
that have only IPv6 address records;
*) snmp - provide ups alarms for bad or low battery or for ups overload;
*) route - fixed SNMP getnext queries, were failing to find next
prefix in the OID order;

What's new in 5.5 (2011-Jun-20 14:43):

*) console - resolved problem that appeared in version 5.4. it caused
'sup-output' command to crash console on systems with many ethernet
interfaces or very long interface names.
*) serial console - do not automatically send login prompt to attached
usb modem if no other serial port exists;
*) winbox - fixed scrolling in terminal window;
*) webfig - encrypt whole session even in non https mode;
*) do not show contents of skin files to users without
'sensitive' permission;

What's new in 5.4 (2011-May-27 13:18):

*) webfig - do not try to open many windows
if first open was blocked by browser;
*) RB4xx ether1 port flapping fixed;

What's new in 5.3 (2011-Apr-29 15:05):

*) snmp - fix table get next with partial row keys;
*) snmp - respond from correct source address when multiple exist;
*) snmp - fix possible interface disappearing when walking ipNetToMediaTable;
*) snmp - fix possible memory leak;
*) ipsec - flush SAs and inform peer when rebooting or shutting down;
*) openvpn - fixed crash;
*) implemented terminal in WebFig;
*) implemented Skin mode in WebFig;
*) added support for more Broadcom Tigon3 based ethernet cards;
*) winbox - fixed byte to KiB, MiB and GiB conversion
(digit after decimal point could be a bit off);
*) console - align numbers right in tabular print output;
*) fixed RB450G, RB750G switch chip slow ethernet problem;
*) fix vlan disable not taking effect;
*) userman - fix Authorize.Net payment bypass;
*) userman - added profile option to overwrite shared users option
in user settings when profile is activated;
*) userman - fix db backup if it's size exceeds 2G;
*) wireless - merged ht-extension-channels in to channel-width;

What's new in 5.2 (2011-Apr-21 09:36):

*) fixed webfig;
*) console - fixed problem with supout file generation and export that
appeared in version 5.1, it was causing console to enter busy loop
on some boards;
*) ssh client - added source address and remote command options;
*) user manager - added /tool usermanager profile;

What's new in 5.1 (2011-Apr-08 12:55):

*) ipsec - fix SA lifetime display when timezone offset does not equal 0;
*) ipsec - now default DPD interval is 2 min for new configurations;
*) webfig - make bandwidth-test work;
*) fixed problem - wireless package got disabled after upgrading from v4;
*) sstp - fix problems on multicore systems;

What's new in 5.0 (2011-Mar-31 11:33):

*) route - fixed cause of crashes when handling multipath routes;
*) route - fixed limit on maximum active IPv6 route count,
was causing issues with more than 2000 active routes;
*) ipsec - added command kill-connections under remote-peers;
*) ipsec - fix responder side phase2 negotiation problem
which prevented more than one Windows7 host to initiate SA;
*) fixed vrrp - interface was invalid after undoing remove;
*) winbox - added more detailed /interface ethernet stats;
*) winbox - added ability to send e-mail;
*) winbox - added missing 'set-metric' parameter
in 'Routing/Prefix List';
*) wireless - 802.11 dynamic distance fix;
*) fixed problem - packages could not be uninstalled if disk was full;
*) fixed problem - some of the RouterBOARDS did not reboot properly sometimes;
*) fixed problem - VLANs on bridge interface did not work;
*) ssh - client supports public key authentication;

What's new in 5.0rc11 (2011-Mar-04 14:29):

*) led trigger - changed blinking for modem signal and interface monitoring;
*) ppp - added ability to specify data-channel for ppp server interfaces;
*) ipsec - added more Diffie-Hellman groups;
*) console - fixed a memory leak;
*) console - don't recreate default '/system console' entry for the serial
port if it is removed;
*) netinstall - fixed CD-ROM & usb install;
*) wireless nv2 - fixed RB532 freeze;
*) wireless - fixed station-bridge mode;
*) wireless - added station-bridge support for 802.11 and nstreme;
*) gps - show higher precision coordinates;
*) snmp - added OIDs for kvm and metarouter;
*) usermanager - works again and to make user profile active after signup,
please recreate relevant user profiles;

What's new in 5.0rc10 (2011-Feb-17 14:06):

*) routing - fixed ipv6 connected routes,
IPv6 connected routes disappeared after interface restart;
*) routing - fixed high CPU usage when adding BGP ipv6 routes;
*) winbox - fixed opening terminal window to KVM instance;
*) winbox - fixed connect button in wireless scan;
*) winbox - fixed make-binding in hotspot hosts;
*) ipsec - fix possible crash when ipv6 is enabled;
*) snmp - add usb power reset (see updated MIB);

What's new in 5.0rc9 (2011-Feb-09 13:57):

*) wireless - fixed disconnect problem on long distance
802.11 40MHz links;
*) wireless nv2 - fixed station mode that broke when station-bridge
was introduced
*) wireless - more improvements for 11n compatibility;
*) routing - fixed problem with best route selection, sometimes inferior route
could get selected as the active, problem was introduced in 5.0rc8;
*) kvm - fix guest starting;

What's new in 5.0rc8 (2011-Feb-01 14:03):

*) added led trigger - change leds on different events;
*) snmp - restored access to routing tables;
*) snmp - fixed memory leak for OID 1.3.6.1.2.1.25.2;
*) ipsec - added ipv6 support;
*) removed broadcast setting from ip address;
*) radv - fixed problem when wrong link local address was used
to send advertisements on bridge interface;
*) ppp - make IPv6 work again (introduced in v5.0rc7);
*) ppp - fixed problem when user re-authenticated and traffic accounting
included data from previous session;
*) fixed traffic-flow on x86-smp (could stop sending flows);
*) improved usb modem mode switching;
*) kvm - fixed problem when sometimes virtualization detection fails;
*) routing - route with recursive gateway sometimes was not selected as
active, if another inferior route with directly reachable gateway
was present;
*) bgp - removed "interface" property from bgp peer configuration, now
ipv6 link local remote address must be specified using the
"address%interface" notation;
*) added extended ethernet statistics (/interface ethernet print stats) for RB800,RB1000,RB1100 and RB7xx with AR7241 or newer cpu;
*) wireless - improved 11n compatibility;
*) wireless nv2 - added support for station-bridge mode;
*) wireless nv2 - added area support;
*) wireless - added ability to set registration-table comment using RADIUS
attribute;
*) implemented usb power-reset command on RB SXT 5HnD;

What's new in 5.0rc7 (2010-Dec-29 10:39):

*) fixed hotspot;
*) tftp - fixed problem when nobody could
connect if no ip-address were provided;
*) winbox - fixed mac ping from neighbor list;
*) fixed simple queues on little endian cpus;
*) fixed simple queues without provided dst-address;
*) fixed problem - could not update license for
old style 7 digit software-id's;
*) fixed winbox - IPv6 route could not be added;
*) ssh - allow bigger packets (fixes some disconnecting problems);
*) added support for RDC R6040 Ethernet controller;

What's new in 5.0rc6 (2010-Dec-23 13:33):

*) ntp server now requires a broadcast address for broadcast mode to work
it should be specified under broadcast-addresses (X.X.X.255),
255.255.255.255 is not going to work;
*) ssh - fixed showing forwarding settings,
check your setting after upgrade!
*) allow to specify multiple networks (including IPv6)
in user's allowed-from list;
*) added support for Safe Mode to WinBox;
*) allow to specify non acceptable groups for RADIUS console logins;
*) handle correctly IPv6 address on bridged or switched interfaces;
*) added IPv6 connection list;
*) added IPV6 support to graphing;
*) added IPv6 support to SNTP client;
*) added IPv6 support to NTP client & server;
*) added IPv6 support to RADIUS client;
*) added IPv6 support to snmp;
*) added IPv6 support to tftp server, also changed logging levels;
*) added IPv6 support to ssh client;
*) added IPv6 support to watchdog;
*) added IPv6 support for /tool e-mail;
*) added IPv6 support to log remote target;
*) added IPv6 support to API;
*) added IPv6 support to winbox;
*) added IPv6 support to ftpd;
*) added IPv6 support to netwatch;
*) added IPv6 support for /queue simple;
*) added IPv6 support for /tool bandwidth-test;
*) added IPv6 support for /tool torch;
*) added IPv6 support for /interface vrrp (version 3);
*) added IP/IPv6 over ipv6 tunnel interface (/interface ipipv6);
*) added Ethernet over IPv6 tunnel interface (/interface eoipv6);
*) snmp - added ipv6AddrTable from IPV6-MIB;
*) wireless nv2 - fixed station-wds mode multicast problem;
*) wireless nv2 - fixed occasional encrypted link stalls;

What's new in 5.0rc5 (2010-Dec-01 07:47):

*) logging - added email-starttls option for email target;
*) pcq - added burst settings, like in "/queue tree" and "/queue simple";
*) pcq - can specify address masks for pcq;
*) pcq - added ipv6 support;
*) wireless - fixed WPA;
*) radius - fixed encryption key decoding for wireless EAP & PPPs;
*) winbox - make keyboard work right away after main window is activated;
*) snmp - fix BER encoding for negative INTEGER values;

What's new in 5.0rc4 (2010-Nov-22 16:58):

*) radius - fixed Disconnect and CoA response signature generation;
*) winbox - make double click work in text fields again;
*) winbox - allow to drag windows outside of main one to the left;
*) winbox - make some settings look more consistent;
*) winbox - allot to specify IPv6 address in routing filter prefix;
*) winbox - make possible to open IPv6 routes without crashing;
*) winbox - improved item reordering in long lists;
*) winbox - improved SNMP configuration support;
*) winbox - added support for KVM configuration;
*) winbox - added support for Traffic Engineering configuration;
*) ovpn - make ovpn client work with OpenVPN v2.1.3;
*) lcd - support Crystalfontz 631,633
also support for Crystalfontz lcd contrast setting is added;
*) console - fixed missing return value of the ping command when executed
from a scheduler entry;
*) console - 'ping' command with specified value of 'interface' always forced
"arp-ping=yes", fixed;
*) routing - fixed problem with 'check-gateway' status update that could get
triggered when multiple routes with different values of 'target-scope'
and 'check-gateway' referenced the same gateway IP address;
*) store - allow to use external disks;
*) modem firmware directory can be specified in /port firmware
Gobi users should change this setting or directory name;
*) ups - support USB UPS on RB4xx as well;
*) snmp - fix BER encoding for some INTEGER based values;
*) snmp - provide proxy stats using SQUID-MIB;
*) snmp - provide ups info using UPS-MIB;
*) snmp - provide external storage information;
*) wireless nv2 - add missing statistics fields;
*) wireless - add per-chain signal strength fields;
*) added hotspot html variable "host-ip";
*) fixed pcq queue type;
*) fixed leds on RB750;
*) added hotspot html variable "host-ip";
*) wireless nv2 - fixed station-wds mode multicast problem;
*) wireless nv2 - fixed occasional encrypted link stalls;

What's new in 5.0rc3 (2010-Oct-29 09:02):

*) lcd - support Crystalfontz 635
*) wireless nv2 - fix stalls on encrypted 11n links using high rates;
*) wireless nv2 - fix encryption related kernel crash;
*) sstp - fixed memory leak;
*) fixed problem - bad boot/kernel crc was reported on powerpc boards
when in fact it was good;

What's new in 5.0rc2 (2010-Oct-27 16:20):

*) wireless nv2 - encryption support;
*) tool fetch - support ftp STOR;
*) ospf - fixed crash when working with external LSA that contain
forwarding addess;
*) ipsec - supports NAT-T drafts;
*) ipsec - added debug logging, to maintain same log verbosity as before with
'ipsec' topic now use topics 'ipsec,debug,!packet';
*) ipsec - make it work with EoIP, GRE, PPTP and L2TP;
*) support for Atheros AR9271 wireless chip;
*) added support for more Intel 82575/82576 PCI-Express Gigabit Ethernet cards;
*) added support for idle detection on RB1xx/RB5xx in /tool profile;
*) fixed Wireless manual tx power configuration for 11n rates in WinBox;
*) fixed torch;

What's new in 5.0rc1 (2010-Sep-17 13:58):

*) wireless nv2 - add WDS support;
*) added ability to monitor cpu usage by task (/tool profile);
*) added support for RPS (Receive Packet Steering) on multicore systems;
*) added cisco compatible gre tunnels;
*) fix simple queues on multicore (fixes intel 82576 crash/reboot);
*) fixed sstp memory leak;
*) winbox - fixed ability to configure RB1100 switches;
*) ssh - fix possible crashing;
*) snmp - fix GET request processing;
*) ipsec - added ability to specify ID_USER_FQDN peer identity;
*) ipsec - encypt last IKE phase 1 packet when in aggresive mode as initiator;
*) wireless nv2 - added nv2-cell-radius parameter to specify distance
in km to farthest client on AP;
*) wireless nv2 - fix transmit stall issue for non-11n chips;
*) wireless - fix x86 nstreme multiprocessor hang;
*) made user manager web interface work again;
*) updated drivers and kernel (to linux-2.6.35);

What's new in 5.0beta6 (2010-Aug-10 13:22):

*) sstp - fixed memory leak;
*) wireless - changed band setting and added channel-width setting
*) wireless - support for 11n rates in 5&10mhz channels
*) wireless nv2 - fixed multiple problems including occasional tx stall;
*) made gps accessible through SNMP;
*) snmp - added GETBULK support, no more table caching - solves problems
with huge tables, routing tables currently are not available;
*) ssh - fixed public key authentication in case
when client is not verifying if server will accept the key;
*) fixed problem - MetaROUTER did not work on RB800, RB1000 & RB1100;

*) user manager is not working - will be fixed in next version;
*) intel 82576 (uncommon expensive chip) crash/reboot to be fixed in
next release;

What's new in 5.0beta5 (2010-Jul-23 14:50):

*) email - supports multiple CCs
*) fix 5&10MHz channel support for 11n cards;
*) ssh - fix ssh client crash;
*) ssh - password authentication is disabled for users with public keys;
*) ping - fixed ping packet-loss calculation;

What's new in 5.0beta4 (2010-Jun-28 16:17):

*) console - /ping command again returns number of ping responses received,
didn't work in 5.0beta3;
*) added ability to monitor each cpu core usage;
*) added support for SATA,SCSI & USB CD-ROMs in CD installer;
*) fixed problem - IRQ balancer did not use correct CPU core
on non auto MSI irqs after reboot;
*) fixed memory leak;
*) route - new property 'vrf-interface' (for static and dhcp routes),
automatically updates 'routing-mark' of the route to keep it in the same
VRF as the specified interface;

What's new in 5.0beta3 (2010-Jun-17 13:46):

*) hotspot - drop hotspot specific tcp connections from non-hotspot clients
already at firewall;
*) lcd - added support for AX89063
*) console - output of '/ping' and '/tool traceroute' commands is more
in line with the rest of the console commands;
*) api - '/ping' and '/tool traceroute' commands are fully functional;
*) console - added 'server' and 'server-port' arguments to '/resolve' command;
*) lcd - show free/total memory in units of million bytes (MB);
*) lcd - added page that shows system identity;
*) sstp - made it work with Windows 7;
*) sstp server - client reconnects did not work;
*) winbox - implemented proper maximize support for inner windows;
*) fix 5&10MHz channel support for 11n cards;
*) added IRQ balancer;
*) enabled PCI MSI on i386 multicore setups;

What's new in 5.0beta2 (2010-Apr-30 11:24):

*) added wireless distance setting, removed ack-timeout;
*) improved 802.11 operation for outdoor distances;
*) fixed sstp on x86;
*) console - removed 'delay' argument from '/system scheduler add' command;
*) console - remove 'comment=""' values from export;
*) console - updated '/system script job':
- also show active login sessions here;
- new read-only property 'type' with values "command", "login"
or "api-login" for running commands and either kind of login sessions;
- new optional read-only property 'parent' with id of the job that
has spawned this one;
*) console - changed "started" property of '/system script job' to use
local time;
*) console - new property 'type' in '/system script job'
*) console - added '/port remote-access export' command;
*) console - fixed bug that caused "cannot set ..." error when using
some properties in 'find' commands;
*) show old software id in export file header;
*) api - can supply password to '/system/upgrade/upgrade-package-source/add';
*) api - 'print' command was not showing values of some properties
such as 'servers' in "/ip/dns";
*) api - fixed api login sessions not dissapearing from '/user active' after
termination;
*) '/user active' now lists type of api connections as 'api';
*) added support for hardware watchdog on RB1000 & RB800;
*) added support for ASIX AX88xxx based USB Ethernet Adapters on RB4xx;
*) fixed problem - ipv6 traffic was not bridged if ipv6 package was not enabled;
*) fixed getting interface stats in dude;
*) fixed metarouter stability problem on RB400s & RB750s;
*) fixed metarouter - it didn't work on RB1000 with 2Gb;
*) fixed metarouter - it locked up on RB800;
*) fixed problem - SFQ queues did not work on interfaces (wireless) if none
of simple or tree queues were added;
*) fixed RB800 temperature;
*) fixed problem - WinBox crashed while opening VAP interface;
*) dhcp server - fixed possible inactive dhcp server in case of many
dhcp leases with address-pool enabled;
*) dhcp server - show non-printable option 82 agent-circuit-id and
agent-remote-id values in hexadecimal notation
(in the same way as client-id is shown);

What's new in 5.0beta1 (2010-Mar-31 09:17):

*) updated drivers and kernel (to linux-2.6.32.5);
*) ssh is now completely rewritten (supports connection forwarding, only DSA keys);
*) added support for SSTP protocol (PPP over TLS);
*) added support for multiple Intel Ethernet cards;
*) added support for IPv6 over PPP
(enabled by default if ipv6 package is installed),
link-local addresses are assigned, and server can issue IPv6 global prefixes
to clients per ppp secret or RADIUS reply (Framed-IPv6-Prefix);
*) added proper support for MPLS over PPP (by default it is now disabled);
*) fixed RB800 temperature;
*) silentboot feature updated;
*) WinBox - any file dropped on WinBox will be uploaded to router;
*) multicast - fixed possible crash during PIM startup;
*) report platform name in "/sysrem resource";
*) fixed problem - vlans were not working on RB750 ether1;
*) fixed mac address handling on RB750, some specific arp requests did not work;
*) more than two dns servers allowed in /ip dns;
*) sniffer and torch could process packet from other interfaces;
*) ospf - fixed DR and BDR election;
*) ospf - changed "/routing ospf route" to show type 2 metric instead of
internal metric for type 2 external routes;
*) added IPv6 support to trafflow (v9 only);
*) rewritten user-manager (formerly known as userman-test);
*) dns cache rotates order of records in reply messages

What's new in 4.6:

*) only accept dotted decimal notation for IP addresses. Use of numbers
with leading zero, numbers larger than 255 and non-decimal numbers
is not accepted (but still can omit third or second and third numbers,
if they are zero);
*) email - user must enable tls explicitly
*) remove limit on number of multicast enabled interfaces, maximum was 32;
*) dhcp server - show last-seen time for leases;
*) fixed - when closing winbox terminal window with active serial-terminal
console command, serial port sometimes was left in acquired state;

What's new in 4.5:

*) ipsec - added blowfish, twofish, and camellia encryption algorithms;
*) fixed static route removing;
*) fixed DHCP client compatibility with some DHCP servers;
*) added static multi-cast route support;
*) fixed temperature monitor on RB800 and RB450G;
*) user manager - payment bug fix - now able to buy
credits without extend price specified;

What's new in 4.4:

*) snmp - fixed snmp version three;
*) snmp - fixed vlan interface speed;
*) hotspot - fixed radius variables in hotspot html pages;
*) removed support for xen;
*) routing - added support for BFD protocol;
*) fixed problem - MetaROUTER sometimes froze on RB4xx;
*) fixed OSPFv3 on bridge interfaces;

What's new in 4.3:

*) kvm - vnc support, booting from cdrom image
*) API - fixed possible crash when running concurrent commands;
*) console - fixed logging commands: 'warning', 'error' and 'debug' were
all using 'info' topic;
*) bgp - added routing-table configuration option for instances;
*) bgp - added 'as-override' and 'passive' configuration options for peers;
*) bgp - added support for Site of Origin extended communities;
*) bgp - fixed some network issues;
*) ospf - fixed problem: when last neighbor on multi-access interface disappeared,
incorrect RouterLSA was generated on designated router;
*) metarouter - allow to specify metarouter's memory size when importing image;
*) firewall - added 'routing-table' matcher;
*) fixed problem - e1000 driver did not work in virtual machines;

What's new in 4.2:

*) fixed problem - RB450G ethernet did not work if one of the ports was disabled;
*) fixed ethernet of RB433 with switch chip IP175D;
*) fixed route attribute problem;
*) fixed route next-hops falling under multiple connected routes;

What's new in 4.1:

*) fixed problem - RB750 (clocked at 300MHz) Ethernet did not work;
*) fixed problem - routes on some interfaces (like VLAN) were not activated;
*) ppp, gps, sms, serial terminal - allow use of different channels
on same port across multiple programs simultaneous
*) dhcp server - added support for dynamic address-list entries;
*) hotspot - added support for dynamic address-list entries;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);

What's new in 4.0:

*) IT87XX hardware monitoring sensor support;
*) kvm allows to choose emulated nic model;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);
*) hotspot - fixed redirect after login in case if client gets new IP address;
*) console - commands like 'monitor', 'torch' and others that periodically
refresh information sometimes failed to work when started from
the scheduler;
*) console - scheduled scripts no longer require 'test' policy to run;
*) console - fix issues with scripts that contain lines with trailing spaces;
*) console - add back compatibility with old scripts that use space instead
of '=' to separate argument name and value;
*) console - following fixes:
- accept item numbers when prompted by command to specify item;
- argument names without '=' were matched even when expecting unnamed
value; this broke code such as:
:foreach i in=1,2,3 do {}
here 'i' was matched as argument name "in";
- 'tab' key did not automatically append '=' after complete argument
names;

What's new in 4.0rc1:

*) console - removed support for Lua (will be reintroduced later);
*) incorporated all the bug fixes since v3.30;
*) port remote-access - added 'log-file' property. If value is a non-empty
string, then all data that is read from the port is appended to a file
with that name, regardless of the active remote connection;
*) console - removed '/user' from the output of top level '/export' command,
still can be exported by '/user export';

What's new in 4.0beta4:

*) routing - changed BGP network and default-originate behavior;
*) web proxy - allow to edit error page;
*) console - terminal window size change now does not trigger full terminal
reset;
*) mesh protocol - improved loop prevention (becomes incompatible with earlier versions);

*) incorporated all the bug fixes since v3.27;

What's new in 4.0beta3:

*) added support for 802.11n atheros based wireless cards;
*) added ability to run other OSs in MetaROUTERs;
*) console: Lua scripting language. http://wiki.mikrotik.com/wiki/Lua
*) console: added nstreme-dual OIDs;
*) incorporated all the bug fixes since v3.23;

What's new in 4.0beta2:

*) console: added 'without-paging' argument to 'monitor' commands;
*) console: now 'without-paging' and 'interval' arguments in of 'print'
commands work together. Printing can be stopped by pressing 'q' or
ctrl-c, any other key triggers printing;
*) incorporated all the bug fixes since v3.22;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" did not show proper package
architecture and was unable to fetch new packages;

What's new in 4.0beta1:

*) added support for MetaROUTERs;
*) all test packages are regular ones;
*) console - can mix named and unnamed arguments, can use names for unnamed
argument values. For example all of the following commands are
accepted now:
/ping 10.11.12.13 count=4
/ping address=10.11.12.13 count=4
/ping count=4 10.11.12.13

1 komentar:

  1. I have a simple philosophy: Fill what's empty. Empty what's full. Scratch where it itches RS GP, Don't go around saying the world owes you a living. The world owes you nothing. It was here first RuneScape Gold, Being happy doesn't mean that everything is perfect. It means that rs gold you've decided to look beyond the imperfections.

    You laugh at me for being different, but I laugh at you for being the same LOTRO Gold, the consequences of today are determined by the actions of the past Lord Of The Rings Gold, to change your future,LOTRO Gold alter your decisions today.

    ReplyDelete